Professionele 12V-12V DCDC Stabilisator / Isolator 100W
5147
NEW !!
IN STOCK NOW !!
9 - 18V unregulated in, 12V regulated out at 8 Amps (100Watts)
Ingangspanning Vdc 9 - 18
Uitgangsspanning Vdc 12,5
Vermogen 100W / 8 A
Gal. gescheiden ja
|
Isolated converters |
100W |
200W |
360W |
|
Power rating (W) |
100
(12,5V/8A or 24V/4A) |
200
(12,5V/16A or 24V/8A) |
360
(12,5V/30A or 24V/15A) |
|
Galvanic isolation |
yes |
yes |
yes |
|
Temperature increase after 30 minutes at full load (°C) |
25 |
30 |
30 |
|
Fan assisted cooling
(temp. controlled) |
no |
yes |
yes |
|
Weight kg (lbs) |
0,5 (1.1) |
0,6 (1.3) |
1,4 (3.1) |
|
Dimensions hxwxd in mm
(hxwxd in inches) |
49 x 88 x 152
(1.9 x 3.5 x 6.0) |
49 x 88 x 182
(1.9 x 3.5 x 7.2) |
64 x 163 x 160
(2.5 x 6.4 x 6.3) |
|
Input voltage (xx): 12 V (9 . 18 V) or 24 V (20 . 35 V) or 48 V (30 . 60 V) or 96 V (60 . 120 V) |
|
Output voltage (yy): 12,5 V or 24 V |
|
Common Characteristics |
|
Output voltage stability |
2 % |
|
Output voltage tolerance |
3 % |
|
Output noise |
< 50 mV rms |
|
Off load current |
< 25 mA (isolated converters) |
|
Efficiency |
Non isolated: appr. 92% Isolated: appr. 85% |
|
Isolation |
> 400 Vrms between input, output and case
(isolated products only) |
|
Operating temperature |
- 20 to + 30°C (0 to 90°F). Derate linearly to 0 A at 70°C (160°F) |
|
Humidity |
Max 95% non condensing |
|
Casework |
Anodised aluminum |
|
Connections |
6.3 mm (2.5 inch) push-on flat blade connectors |
|
Protection: Overcurrent
Overheating
Reverse polarity conn.
Overvoltage |
Short circuit proof
Reduction of output voltage
Fuse and reverse connected diode across input
Varistor (also protects against load dump) |
|
Standards: Emission
Immunity
Automotive Directive |
EN 50081-1
EN 50082-1
95/45/EC |
|
!
<<
|