NIEUW !! IN VOORRAAD !!
Zeer geschikt als CarPC!
The M350 is Industry's smallest universal enclosure (192 x 210 x 62mm , 2.5L) capable of housing mini-ITX boards ranging from tiny Atoms to fully featured desktop or mobile CPUs.
M200
Delivery from stock!!
Has one fan onboard, second is optional
PSU's that will fit this case:
pico90 + 60W adapter or pico120W + 60W
M200-LCD
Very small ! Size 20cm (w) x 5.4cm x 24cm
M300
Size 20cm (w) x 7.8 cm x 24cm
M300-LCD
NEW !!
These sturdy DIN rail mounting brackets come in handy for a wide variety of projects where DIN rail is used for mounting the M350 on a DIN Rail.
Comes in set of two pcs with mounting screws included.
Wallmount bracket to fasten the M350 to any horizontal or vertical surface (wall, under desk, vehicle trunk, inside cabines).
Comes in set ow two brackets. M3 Screws Included to fasten the wall mount bracket to M350.
Wall mount screws are not included.
Vesa mounting system, set of 4 double head screws
Instructions:
1) Fasten double head screws to a Vesa 100x100mm monitor (or any device that supports vesa mount)
2) Hang the M350 into the double head screws
3) M350 can be mounted horizontal or vertical
This bracket is needed only in instances where the 2nd hard drive is needed. When 40x40mm fans are installed, can also be used for spot cooling.
NOTE: The M350 is already equipped with one Hard Drive Mounting Bracket, do not buy this unless you really need it.
The I/O bracket for D945GSEJT allows systems integrators to use a PCI bracket in the M350 enclosure.
This combination allows fitting a full sized PCI card in a 2.5L design, making it world's smallest mini-ITX + PCI solution.
Hard drive utilization is not affected by PCI card. Use extra ventilation if needed.
I/O Shield for D945GSEJT
- Special PCI riser included
- Fits any PCI card
- Allows use of PCI card low profile case
- Designed for
- Total design footprint = 2.5L
- Word's smallest mini-ITX + PCI solution